FM-1000

Trimble provides a satellite coverage planning tool at www.trimble.com/GNSSPlanningOnline. Locate your location on the map, and this tool will indicate the number of satellites visible during the selected timeframe.

Yes, contact your dealer for details.

From the home screen of the FM1000, select the "Unlocks" option. This will populate a list of what is unlocked in the display. This applies to display features as well as correction levels.

Yes, AFS Connect can be used. An NTRIP subscription is required. Contact your dealer to purchase.

A cellular RTK subscription must be purchased separately.

NTRIP connectivity is achieved by entering the NTRIP server details using a Case IH AFS Pro 700 monitor. Once the modem is configured it will stay configured.

Navigate to the System Information Tab from the home screen. The software version is located in the upper left.

Navigate to the System Information Tab from the home screen. The Autopilot Controller version is located on the right.

Navigate to the System Information tab from the home screen. The internal memory status is located in the lower left.

Satellite settings for CenterPoint RTX, RangePoint RTX, xFill, and Omnistar correction services are as follows:

• Eastern North America Beam frequency is 1557.8590 with a baud rate of 600
• Central North America Beam frequency is 1557.8150 with a baud rate of 2400
• Western North America Beam frequency is 1557.8615 with a baud rate of 600

1. 1. Power the display OFF with the memory device installed.
2. 2. Remove the memory device from the display.
3. 3. Take the memory device from the display to a computer. If a window does not launch when the memory device is installed, then click the "Start" button on the Windows task bar and select "My computer" from the pop-up menu.
4. 4. Select the drive that corresponds to the memory device drive location – for example, “Removable Disk (E:).”
5. 5. Right click on the folder that ends with .cn1 to access a pop-up menu.
6. 6. Click "Send To > Compressed (zipped) folder" or compress the folder with a third party application such as 7-zip or Winzip. Note the location of the .zip file for the next step.
7. 7. If required, transfer the .zip file to a computer that has access to email.
8. 8. Attach the .zip file to an email message.

Not only does the XCN-2050 display have a faster processor and larger internal memory, but new features such as NextSwath are only available for the XCN-2050. The XCN-2050 is designed to handle the increased demands of new applications and allow for future expansion.