Horsepower
400 HP
Picking Speed
Up to 5.2 MPH
FPT Engine
8.7 L
Chamber Capacity (lbs)
4,000 - 10,000

Cotton Module Express

The Most Economical Harvest Solution

The Case IH Module Express eleminates the need for extra equipment such as module builders and tractors. The Module Express harvests the cotton then builds a standard 8ft x 8ft x 16ft module ready for the gin. No need for external plastic wrap or twine.

Explore Features

Module-Building Chamber
Drum
Monitors
Floatation
Engine
Maintenance and Uptime

Module-Building Chamber

From Boll to Module in One Single Step

The module-building chamber is designed to vertically pack a transportable module with no exterior twine or plastic to worry about.

Automatic Intelligent Auger Packing System

The Case IH module-building chamber incorporates a patented system of sensors and augers to move cotton automatically as the module is being compressed. It creates consistent, rectangular modules for excellent weatherability and ginning. And the modules are purposely sized to maximize gin-feeding rates without adding any alterations or expenses.
Standard "Half" Modules

At 8 ft x 8 ft x 16 ft (2 m x 2 m x 5 m), the modules produced by the Module Express 625 are the same height and width as a standard module but half the length. These 16 ft (5 m) “half” modules load and unload individually, yet two fit into a standard module truck like one traditional 32 ft (10 m) module.
No Twine, No Plastic

The whole idea of new technology should be to maximize productivity without added expense. That's why Case IH modules are purposely sized to maximize gin-feeding rates without any modifications at the gin. And because there isn’t any plastic wrap or twine to buy or dispose of, it can't contaminate finished bales.

Drum

Two-sided Drum For Maximum Picking Efficiency

Because cotton plants have two sides, so why not pick both? Maximize your yield and profit by picking more cotton from both sides of the row. Get the most picking efficiency - more than an in-line drum that picks only from one side.

Extenda-Wear™ Spindles

The Module Express 625 Cotton Picker features Extenda-Wear Plus™ spindles with a superior barb pattern of three rows of fourteen barbs. The first three barbs in each row are cut at a 30-degree angle to pick efficiently and help the cotton easily move off the spindle during the doffing process. For more efficient picking, the last 11 barbs are cut at a 45-degree angle. Extenda-Wear Plus spindles have 90-micron chrome thickness to provide you with maximum durability.

Monitors

Complete Information and Control from the Cab

AFS Pro 700

The AFS Pro 700 Monitor brings enhanced processing speed, reduced overall size, and many other new features that are all designed to increase productivity, profitability and help maximize your farms' potential. By tracking percent full, module weight and bales per acre, you can easily plan drop-off points around the field that can be conveniently accessed for loading onto module trucks.

Module Monitor

The module monitor provides operation status and percent full. In the majority of field length and yield possibilities, the Module Express 635 will be on a field end when the module is between 90 and 125 percent of normal size and ready to unload. This minimizes handling of the modules — the module truck picks up the module right where it is unloaded. A 7 in (18 cm), flat-screen, color LCD video monitor provides two camera views — in the module chamber and a rear view behind the machine.

Floatation

Optimized Flotation to Minimize Soil Compaction

Case IH engineers paid special attention to balance, weight distribution and floatation when designing the Module Express pickers to keep ground pressure low.

500/95–32 R1.5 dual-drive tires are used up front for high flotation, with large 23.5–26 steering tires on the powered rear axle.
Longer Chassis provides greater balance.

Engine

Powerful Yet Efficient

Delivers 400 horsepower
Proven to be 17.9% more fuel efficient than prior model years
In-line 6 cylinder
Wet sleeve cylinder design
Bed plate block design
Cross flow cylinder head
Roller overhead camshaft
Four valves per cylinder
Intake air grid heater
Fixed geometry turbocharged with wastegate
Electronic high pressure common rail fuel injection

Maintenance & Uptime

Designed to Work Hard All Day, Every Day

Less Routine Maintenance

With its 200 gal. (757 L) fuel tank, 365 gal. (1,381 L) water solution tank and an 80 gal. (303 L) bar lube tank, the Module Express 625 can pick all day on just one fill-up. And its standard automatic lube system runs for 16 minutes every fan hour — saving an hour from your daily service routine.

Metered lubrication to drum gears, cam tracks, rollers, drum lift arms and fan bearings provides reliability of components and delivers a metered amount of grease to each component automatically.
Easy Access

For all its advanced features and enhanced productivity, the Module Express actually requires less daily maintenance than a traditional basket picker. The two-function service tether allows the operator to easily perform service at ground level.

No need for hand cranks – the Module Express features a simple, hydraulic drum-spread providing full access to the two-sided drums or drum rotation at the touch of a button.

Current Models

Module Express™ 635
The new Case IH Module Express 635 onboard module-building cotton harvester offers unequaled cost-per-acre harvest savings. And with its 400 horsepower Case IH FTP 8.7 liter engine, it takes performance to a whole new level.

Brochures

Module Express Cotton Picker Handout
Share Download

Genuine Case IH Parts & Service

Only genuine Case IH parts were made for your machine and designed for peak performance. Find everything you need from filters, fluids, shop products and safety equipment, to owners manuals, parts diagrams, paint, and batteries, at the Case IH parts store.

Visit the Case IH Parts Store Download or Order Operators Manuals

Next Steps

Find a Dealer

Locate a Case IH Dealer near you.
Find now
Compare Specs

Compare our Module Express Cotton picker specs to other manufacturers' specs.
Compare Now
Case IH Blog

Keep on top of the latest product information, farm show reports, and industry news.
Read Now

{label}

https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V</a>"><a href="https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V">https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V</a></a>"><a href="<a href="https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V">https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V</a>"><a href="https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V">https://www.googletagmanager.com/ns.html?id=GTM-T9FN7V</a></a></a>" height="0" width="0" style="display:none;visibility:hidden">

https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K</a>"><a href="https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K">https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K</a></a>"><a href="<a href="https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K">https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K</a>"><a href="https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K">https://www.googletagmanager.com/ns.html?id=GTM-5WM4L9K</a></a></a>" height="0" width="0" style="display:none;visibility:hidden">

400 HP

Module Express™ Cotton Pickers

Horsepower

400 HP

Picking Speed

Up to 5.2 MPH

FPT Engine

8.7 L

Chamber Capacity (lbs)

4,000 - 10,000

Cotton Module Express

Module-Building Chamber

From Boll to Module in One Single Step

Automatic Intelligent Auger Packing System

Standard "Half" Modules

No Twine, No Plastic